FAQ

How to treat spa water

What chemicals do you put in a hot tub?

What chemicals do I need for a hot tub?

  • A Balancing Act. Your hot tub needs the right balance of chemicals to kill bacteria and work effectively. …
  • Sanitisers. The two main sanitisers are chlorine and bromine. …
  • Oxy Shock & Enhance. …
  • pH Levels. …
  • Calcium Hardness.

How do you treat hot tub water without chemicals?

More than one alternative to chlorine in a hot tub

  1. Ultraviolet (UV) system. This is an excellent alternative to chlorine in a hot tub. …
  2. Salt-based systems. These systems eliminate the need for chlorine or bromine. …
  3. Ozonators. …
  4. Ionizers. …
  5. Non-chlorine shock. …
  6. Enzyme-based treatment. …
  7. Keep your hot tub covered. …
  8. Shower before use.

What causes cloudy spa water?

Sometimes cloudy water is simply caused by pH not being in proper balance. Check the pH level of your water with test strips and adjust if not in the correct range (7.2-7.6 is ideal for hot tub water). Sometimes correcting the pH also corrects water clarity. Add a small amount of clarifier to your hot tub.

Can you shock a hot tub too much?

You only need a small amount of chlorine to successfully sanitize your spa, so it’s possible to overdo it if you’re not careful. Too much chlorine can damage your hot tub and irritate your skin, eyes and lungs. Thankfully, reducing the chlorine levels in your hot tub is very easy to do.

Should I put chlorine in my hot tub everyday?

TESTING AND ADJUSTING YOUR HOT TUB CHLORINE LEVEL

You might be interested:  What color is spa

The chlorine range should be between 1.5 and 3 PPM. Typically, adding chlorine powder to your water every other day will keep your spa water within range, but always test to ensure you add the proper amount.

Do you put chlorine in hot tubs?

While it’s safe to use in swimming pools, liquid chlorine should never be applied to hot tubs. … The high heat in a hot tub rapidly dissolves and disperses liquid chlorine, but not uniformly.

How much chlorine do I put in my hot tub?

You should aim for a level around 5 to 8 parts per million. Wait an additional 30 to 60 minutes before re-checking the free- chlorine level, and do not allow anyone to get in the hot tub until the chlorine levels have dropped between 2 and 4 parts per million, which is a recommended range by the way.

How do you shock a hot tub?

Measure 17g of non-chlorine shock per 1500 litres or 35g of chlorine shock per 1500 litres (consult the label instructions as this can vary based on chemical quality and brand). Carefully add the required shock to the hot tub. Leave the cover off for approximately 20 minutes.

What do you do when your hot tub drains water?

Hot Tub Water >>>

  1. Water your lawn. …
  2. Water your trees and bushes. …
  3. Water your home foundation. …
  4. Pump it into your pool. …
  5. Pump it into a doggy pool. …
  6. Wash your car or boat. …
  7. Maintain optimum water balance. …
  8. Shower before using your spa.

How do I make my hot tub crystal clear?

Five Tips for Crystal Clear Hot Tub Water

  1. Sanitize! We can’t enforce this recommendation (order?) …
  2. Sanitizer doesn’t have a chance to kill what it needs to and create a residual if you don’t keep your water balanced. Testing your water weekly is key. …
  3. Clean Filters. …
  4. Use Clarifier. …
  5. Replace your silver ion cartridge.
You might be interested:  Spa facilities

Can I use my Lay Z Spa without chemicals?

You can use the spa without chemicals but you would need to change the water more regularly. You would have to check with your doctor to see if the chemicals would affect them.

Leave a Reply

Your email address will not be published. Required fields are marked *