SPA tips

Bromine tablets for spa

Can I use bromine tablets in hot tub?

In Summary, using Bromine in your spa or hot tub is best, but to be effective, there needs to be a good level of bromide ions in the water. … Use bromine tablets to more easily maintain a consistent bromine level. Add sodium bromide to your spa, following the label instructions, each time you drain and refill.

How many bromine tablets should I put in my spa?

COMMERCIAL: Add 31 tablets per 10,000 gallons every 5 – 7 days or as needed to maintain an active bromine residual of between 3 and 5 ppm at all times. Introduce 3 tablets per 300 gallons of spa water with the use of a floating tablet feeder or automatic brominator installed on the spa equipment.

How do you treat bromine in a spa?

Add 60g of bromine granules per 1500 litres to sanitise the fresh water and allow the level to drop down to 3-5mg/l before allowing the hot tub to be used.

Is bromine or chlorine better for hot tubs?

High Temperatures. Bromine works better at higher temperatures than chlorine. Above 75°F, bromine remains stable, whereas chlorine is more effective in temperatures as low as 65°F. This makes bromine a better choice for hot tubs and spas, and an unheated pool will be better served by the use of chlorine.

Is bromine in hot tubs dangerous?

Too much bromine exposure can also lead to a buildup of the chemical in your central nervous system. It can depress your nervous system, triggering various psychological issues including acute paranoia. Exposure to high levels of bromine can result in bromine toxicity.

You might be interested:  Best foot spa 2018

How long do bromine tablets last?

about 5 years

How soon can you use hot tub after adding bromine?

thirty minutes

Is bromine harmful to humans?

Bromine is corrosive to human tissue in a liquid state and its vapors irritate eyes and throat. Bromine vapors are very toxic with inhalation. Humans can absorb organic bromines through the skin, with food and during breathing.

Do you need to shock a bromine spa?

Spa Tablets

The beauty of InTheSwim bromine tablets, as detailed in my previous post, is that they contain 27% chlorine! This acts as a built in oxidizer to keep the bromide ions constantly converting a continuous supply of HObr. So, you don’t really need to shock a spa or hot tub to “activate” our bromine tablets.

Can I mix bromine and chlorine in hot tub?

Whether you choose chlorine or bromine, DO NOT: mix them together in the water. This can also cause a dangerous chemical reaction. If you’re going to switch from one to the other, you’ll need to drain and clean your hot tub, and do a line flush.

Where do you put bromine tablets in hot tub?

Use bromine tablets to maintain the bromine level in the water. Once the bromine levels are stabilized, add bromine tablets into a floater and place it in your spa. The tablets will slowly dissolve and release bromine into the water to replace the chemical that is lost over time and keep a healthy balance in the water.

Can you use shock with bromine?

You can still use a chlorine shock even if you use a bromine sanitiser, however, you should never mix chemicals dry. Add the chlorine shock after a water change or heavy use and wait for the chlorine level to reduce before adding your bromine.

You might be interested:  Ultimate skin spa system reviews

What happens if you mix bromine and chlorine?

When you add bromine to a chlorine pool, on the other hand, the bromine does not go away but builds up over time, creating a chlorine demand. Therefore, when you shock the pool with chlorine, the residual bromine will convert the chlorine into, you guessed it, bromine.

What is the best sanitizer for hot tubs?

The Best Hot Tub Sanitizer

  • 1.1 1. Zodiac W20750 Nature2 SPA Stick Mineral Sanitizer.
  • 1.2 2. Jacuzzi ProClear Mineral Spa Sanitizer.
  • 1.3 3. LEISURE TIME 23434 Spa Mineral Purifier.
  • 1.4 4. Pool Frog 01143812 Spa Tub Replacement.
  • 1.5 5. Caldera Spas Monarch Mineral Spa Sanitizer 72358.

Leave a Reply

Your email address will not be published. Required fields are marked *